Product finder

 > Pneumatic & Fluid Technology

Pressure Regulator for subplate mounting

Pressure Regulator for subplate mounting

50.806.00.25.00
These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. Due to their plastic housing these pressure regulators are light-weight and inexpensive. These pressure regulators are installed via flange connection on the bottom side. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O).
Product characteristics
Ambient temperature0 ... +60 °C
Exhaustwith secondary exhaust
MaterialsHousing: POM, seal: NBR, fabric-reinforced
Operating mediumnon-aggressive media
Pressure range0 - 10 bar
Pressure range of settings0 - 2.5 bar
ResetSpring
Type of connectionFlange, on base plate: 2 x